Large color TFT-LCD with a touch panel (8.4-inch) enables easy key entry
Up to 4 titrators, AT-710B potentiometric titrators, MKV-710B Volumetric or MKH-710/2nd Hybrid or additional MKC-710B Coulometric Karl Fischer moisture titrators can be connected and simultaneous measurement is possible
Reduction of power consumption by 30% compared with the conventional product
PRODUCT
Karl Fischer Moisture Titrator (Coulometric titration)
MKC-710M
Features
・Fast measurements
Our proprietary technology achieves electrolytic speeds up to 2.6mg H2O/min.
This shortens the time required for pre-titrations and sample measurements considerably.
・Replaceable diaphragm
Easy maintenance when measuring samples which tend to contaminate the diaphragm as eg. oils: Thanks to a unique mechanism, the ceramic diaphragm of the optional titration cell unit (12-03635-01) can be replaced.
・Result output as PDF files
Paper saving and environmentally friendly – results no longer need to be printed.
Measurement results are converted to PDF and can be stored in a USB flash drive.
- The MKC-710M contains functions to support compliance with the following:
・European Pharmacopoeia Chapter 2.5.32. WATER: MICRO DETERMINATION: VERIFICATION OF ACCURACY
・Japanese Pharmacopoeia Eighteenth Edition Chapter 2.48: Water determination (Karl Fischer Method):
2.4 Suitability of determination
- Up to 4 simultaneous measurements (Simultaneous titrations)
- Can be connected to AT-710B potentiometric titrators, MKV-710B Volumetric Karl Fischer moisture titrators or MKH-710/2nd Hybrid Karl Fischer moisture titrators
- The main control unit and a titrator are separately located by wireless (Bluetooth(R))
- Large color TFT-LCD with a touch panel (8.4-inch)
- Two different user levels and permissions
- With a unique mechanism , the ceramic diaphragm of the optional titration cell unit can be replaced
- Measurement results are converted to PDF and can be stored in a USB flash drive
- By reviewing the conventional electrolytic control method , reduction of power consumption by 30%
- When using ADP-611 , a patented scan mode automatically determines the optimal evaporation temperature.
- Manual solvent change unit is included
Specifications
| Type | Karl Fischer Moisture Titrator |
|---|---|
| Model | MKC-710M |
| Standard configuration | MCU-710M+MKC-710+IDP-100+Manual Solvent Change unit |
| Measuring method | Karl Fischer Coulometric titration |
| Measuring range | Water content : 1ug to 300mg (depends on reagent) Bromine index : 8ug to 300mg |
| Measurement cell | 2-Component or 1-Component |
| Precision | Relative standard deviation : less than 0.3% (n=10) *Per KEM standard measurement conditions and standard liquids |
| Display resolution | 0.1ug |
| Control method | Constant current pulse time control |
| Endpoint detection | Alternate current polarization method with a twin platinum electrode |
| EP sense method | Selective drift stability or limit measurement time |
| Required solvent | 2-Component cell : Anolyte 100mL , Catholyte 5mL 1-Component cell : Anolyte 150mL |
| Method | 120 |
| Key operation | Touch panel |
| Displays | 1) 8.4-inch color LCD 800 x 600 dots 2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish / German / French 3) Simultaneous 4-channel display (Can also display Automatic Potentiometric Titrator simultaneously) |
| Calculation | Concentration of water content , statistics data processing (mean , SD and RSD) and automatic averaging of blank value and factor value |
| Data storage | 500 samples |
| GLP conformance | Registration of operator / User group administration Check performance with standard substance : Reminder of scheduled check date / Record of check results Reagent life control : Reminder of expiration/Reminder reagent replacement date Management of conduction time : Display of operating time |
| External I/O | RS-232C port x4 : for Dot matrix printer , Electronic balance , Data Capture Software (SOFT-CAP) , Evaporator , Multiple sample changer USB ×1 : for USB flash drive , Thermal printer , A4 printer , Keyboard , Barcode reader , Foot switch , USB HUB LAN ×1 : for Personal computer (PC) |
| Extensibility | Measuring instrument : Automatic Potentiometric Titrator (AT-710) , Karl Fischer Moisture Titrator (MKV-710/MKC-710/MKH-710) Three of these instruments can be added Evaporator ADP-611 Multiple sample changer : CHK-501 |
| Ambient condition | 1) Temperature : 5 to 35°C 2) Humidity : 85%RH or below (no condensation) |
| Power source | AC100 to 240V +/- 10% 50/60 Hz |
| Power consumption | Main unit : Approx. 30W Printer : Approx. 7W |
| Dimensions | Touch-on panel controller : 225(W) x 190(D) x 42(H) mm Titration unit : 141(W) x 292(D) x 244(H) mm Stirrer : 107(W) x 206(D) x 340(H) mm (not incl. Solvent Change unit) Solvent Change Unit : 240(W) x 140(D) x 405(H) mm (not incl. tubing) Printer : 106(W) x 180(D) x 88(H) mm |
| Weight | Touch-on panel controller : Approx.1.5kg Titration unit : Approx.3.0kg Stirrer : Approx.2.0kg Solvent Change Unit : Approx.0.6kg Printer : Approx.0.4kg |
| Conformity standard | CE marking EMC : EN61326-1 LVD : EN61010-1 |
Standards
ASTM D1123 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D1533 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
ASTM D3401 Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
ASTM D4672 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols
ASTM D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D5460 Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives
ASTM D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D6869 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM E1064 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
European Pharmacopoeia / 2.5.32. WATER: MICRO DETERMINATION
ISO 10101-3 Natural gas -- Determination of water by the Karl Fischer method -- Part 3: Coulometric procedure
ISO 12937 Petroleum products -- Determination of water -- Coulometric Karl Fischer titration method
ISO 14897 Plastics -- Polyols for use in the production of polyurethane -- Determination of water content
ISO 15512 Plastics -- Determination of water content
ISO 760 Determination of water -- Karl Fischer method (General method)
JIS C2101 Testing methods of electrical insulating oils
JIS K0068 Test methods for water content of chemical products
JIS K0113 General rules for methods of potentiometric, amperometric, coulometric, and Karl Fischer titrations
JIS K1557-2 Plastics -- Polyols for use in the production of polyurethane -- Part 2: Determination of water content
JIS K2275-3 Crude petroleum and petroleum products -- Determination of water -- Part 3: Coulometric Karl Fischer titration method
JIS M8211 Iron ores -- Method for determination of combined water content
JIS M8250 Iron ores -- Determination of hygroscopic moisture in analytical samples -- Gravimetric, Karl Fischer titration and mass-loss methods
United States Pharmacopeia–National Formulary / 38 <921> WATER: DETERMINATION
Software
Option
-
KEM Aqua Karl Fischer Reagents
“KEMAQUA Series"
Karl Fischer Reagent “KEMAQUA Series" is a reagent made by Kyoto Electronics Manufacturing for use with Karl Fischer Moisture titrator. It is available for a wide range of samples.
-
Evaporator
ADP-611
Drying oven for moisture measurement on chip, particulate or powder samples such as plastic pellets
Maximum set temperature : 300℃ -
Evaporator for High Temperature
ADP-512S
This oven evaporates moisture in ores, metallic powder, ceramics and other solids and powder materials by high heat (maximum: 1000℃) for measurement of water content connected to Karl Fischer moisture titrator.
-
Evaporator for Ores
ADP-512
This oven is designed to use with KEM Karl Fischer moisture titrator for measurement of combined water in iron ores according to JIS M8211 Iron Ores – Method for Determination of Combined Water Content.
-
Evaporator for Oil Samples
ADP-513
This unit evaporates moisture of samples dissolved in a heated base oil.
This unit is primarily used for moisture measurements in lubricant oil, grease, tar products, paints and other viscous liquids. -
Multiple Sample Changer for Coulometric Karl Fischer Moisture Titrators
CHK-501
Multiple sample evaporator for Coulometric Karl Fischer Moisture Titrators, suitable for the continuous measurement of up to 24 samples.
The heating temperature can be set for each sample individually, different kinds of sample can thus be measured automatically one after the other. An auto power off function after measurement ensures safe operation. -
Sampler
Sampler
-
Titration Vessel
Titration Vessel
-
1 Component Inner Burette
1 Component Inner Burette
Catalog
■General-Catalog.pdf
■Karl Fischer Moisture Titrator MKV-710 MKC-710.pdf
■KEM-SET-for-Petrochemical.pdf
■KEM-SET-for-Palm-Oil.pdf
■KEMSET for Food.pdf
■KEM-SET-for-Cosmetics.pdf
■KEM-SET-for-Beverage.pdf
